Determine the resultant force on a 4 m high, 12 m wide vertical rectangular plate 16 m submerged below the surface of water. One side of the plate is exposed to hydrostatic forces from water, the other side is exposed to the atmosphere

Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.