subject
Engineering, 30.07.2021 01:30 tiffxnnyyy

Consider a four-station line in which all stations consists of single machines. Station 2 has average processing times of 2 hours per job, while the remaining stations have average processing times of 1 hour per job. Answer the following, under the assumption that process times are deterministic (as in the best case). a). What are rb and To for this line?
b). How do rb and To change if a second identical machine is added to station 2? What effects will this have on performace?
c). How do rb and To change if the machine at station 2 is speeded up to have average processing times of 1 hour? What effects will this have on performance?
d). How do rb and To change if a second, identical machine is added to station 1? What effects will this have on performance?
e). How do rb and To change if the machine at station 1 is speeded up to have average processing times of 1/2 hour? What effects will this have on performance? Do your results agree or disagree with the statement "An hour saved at a nonbottleneck is a mirage (i. e., of no value)"?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.
Answers: 1
question
Engineering, 04.07.2019 19:10
In general, how do thermosetting plastics compare to thermoplastics in mechanical and physical properties?
Answers: 3
question
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
question
Engineering, 04.07.2019 19:20
To save energy, the air supply to a 2000 ft office has been shut off overnight and the room temperature has dropped to 40°f. in the morning, the thermostat is reset to 70°f and warm air at 120 f begins to flov in at 200ft'/min. the air is well mixed within the room, and an equal mass flow of air at room temperature (changing with time) is withdrawn through a return duct. the air pressure is nearly 1 atm everywhere. ignoring heat transfer with the surroundings and kinetic and potential energy effects, estimate how long it takes for the room temperature to reach 70°f. plot the room temperature as a function of time.
Answers: 1
You know the right answer?
Consider a four-station line in which all stations consists of single machines. Station 2 has averag...
Questions
question
Mathematics, 21.04.2021 20:30
question
Mathematics, 21.04.2021 20:30
Questions on the website: 13722367