Engineering, 05.08.2021 19:00 ashhull2002
A float sensor for the determination of the level of water in a vessel has a cylindrical float of mass 2.0 kg, cross-sectional area 20 cm2 and a length of 1.5 m. It floats vertically in the water and presses upwards against a beam attached to its upward end. What will be the minimum and maximum upthrust forces exerted by the float on the beam? Suggest a means by which the deformation of the beam under the action of the upthrust force could be monitored
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
Engineering, 04.07.2019 19:10
What is the main objective of using reheat rankine cycle?
Answers: 3
You know the right answer?
A float sensor for the determination of the level of water in a vessel has a cylindrical float of ma...
Questions
Chemistry, 08.01.2021 22:50
Mathematics, 08.01.2021 22:50
Mathematics, 08.01.2021 22:50
Mathematics, 08.01.2021 22:50
Health, 08.01.2021 22:50
Mathematics, 08.01.2021 22:50
Mathematics, 08.01.2021 22:50
English, 08.01.2021 22:50
History, 08.01.2021 22:50
