Air enters a compressor operating at steady state at T1 = 320 K, p1-2 bar with a velocity of 80 m/s. At the exit, T2 = 550 K, p2-10 bar and the velocity is 180 m/s. The air can be modeled as an ideal gas with cp 1.01 kJ/kg K. Stray heat transfer can be ignored. Let To 300 K, po- 1 bar. Ignore the effects of motion and gravity. Determine, in kJ per kg of air flowing,: (a) the magnitude of the power required by the compressor.
(b) the rate of exergy destruction within the compressor.

For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater

Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.

Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges