Engineering, 12.08.2021 22:50 tristan70
An ideal cold air-standard Diesel Cycle operates at steady state. The pressure and temperature at the beginning of the compression process is 70 kPa and 300 K. The pressure and temperature at the end of the heat addition process is 6 MPa is 2000 K. The Cpof air is 1.1kJ/kg. K and k = 1.4. For the cycle:.
(a) Find the p, T (in K) and specific volume (m²/kg) for each state
(b) the heat addition and work done in each process, in kJ/kg.
(c) the compression ratio
(d) the cutoff ratio
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
Engineering, 06.07.2019 03:20
Aparticle moves along a straight line such that its acceleration is a=(4t^2-2) m/s, where t is in seconds. when t = 0, the particle is located 2 m to the left of the origin, and when t = 2, it is 20 m to the left of the origin. determine the position of the particle when t=4s.
Answers: 1
You know the right answer?
An ideal cold air-standard Diesel Cycle operates at steady state. The pressure and temperature at th...
Questions
Mathematics, 13.09.2021 03:10
English, 13.09.2021 03:10
Advanced Placement (AP), 13.09.2021 03:10
Mathematics, 13.09.2021 03:10
History, 13.09.2021 03:10
Mathematics, 13.09.2021 03:10
Mathematics, 13.09.2021 03:10
English, 13.09.2021 03:10
Mathematics, 13.09.2021 03:10
