Engineering, 17.08.2021 02:50 orieo
If you examined the microstructure of a 1080 steel at room temperature and found austenite in the microstructure, would that indicate that the steel had been cooled under equilibrium or non-equilibrium conditions?
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
You know the right answer?
If you examined the microstructure of a 1080 steel at room temperature and found austenite in the mi...
Questions
Biology, 15.03.2022 04:40
Mathematics, 15.03.2022 04:40
English, 15.03.2022 04:50
History, 15.03.2022 04:50
World Languages, 15.03.2022 04:50
Mathematics, 15.03.2022 04:50
Biology, 15.03.2022 04:50
