Engineering, 18.08.2021 05:50 sabahfayaskhan
While performing a three minute quick charge test (at rate of 30 to 40 amps). battery terminal voltage rises above 15.5 volts. what action should the technician take?
A. Fill with distilled water and retest
B. Lower charging rate
C. Increase charging rate
D. Replace battery
Answers: 1
Engineering, 04.07.2019 18:10
The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false
Answers: 1
Engineering, 04.07.2019 18:10
For the closed feedwater heater below, feedwater enters state 3 at a pressure of 2000 psia and temperature of 420 °f at a rate of ix10 ibhr. the feedwat extracted steam enters state 1 at a pressure of 1000 psia and enthalpy of 1500 btu/lbm. the extracted er leaves at an enthalpy of 528.7 btu/lbm steam leaves as a saturated liquid. (16) a) determine the mass flow rate of the extraction steam used to heat the feedwater (10) b) determine the terminal temperature difference of the closed feedwater heater
Answers: 3
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
While performing a three minute quick charge test (at rate of 30 to 40 amps). battery terminal volta...
Social Studies, 26.07.2019 13:00
History, 26.07.2019 13:00
Biology, 26.07.2019 13:00
History, 26.07.2019 13:00
Mathematics, 26.07.2019 13:00
History, 26.07.2019 13:00
History, 26.07.2019 13:00
Mathematics, 26.07.2019 13:00
Mathematics, 26.07.2019 13:00
Chemistry, 26.07.2019 13:00