Engineering, 18.08.2021 15:50 jbcupcake
A concentric tube arrangement, for which the inner and outerdiameters are 80mm and 100mm, respectively, is used to remove heatfrom a biochemical reaction occurring in a 1-m-long settlingtank. Heat is generated within the tank at a rate of 10^5W/m^3, and water is supplied to the annular region at a rate of 0.2kg/s.
Required:
Determine the inlet temperature of the supply water that willmaintain an average tank surface temperature of 37 degrees C. Assume fully developed flow and thermal conditions. Is this assumption reasonable?
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:20
Have a greater impact on maintenance productivity than any other support group. (clo5) a)-the top management b)-inventory and purchasing c)-sub-contracting d)-cmms
Answers: 2
Engineering, 06.07.2019 02:30
Plot schematically the tensile stress versus strain curves for a typical thermoplastic material at a temperature below its glass transition temperature (tg and at a temperature above its tg, respectively. do the same for a typical thermosetting material. list in a table any differences or similarities between the two materials at t> tg and t < tg, respectively, and relate them to the structures of the two types of polymers
Answers: 3
You know the right answer?
A concentric tube arrangement, for which the inner and outerdiameters are 80mm and 100mm, respective...
Questions
English, 16.12.2020 15:50
Mathematics, 16.12.2020 15:50
Biology, 16.12.2020 15:50
Mathematics, 16.12.2020 15:50
Mathematics, 16.12.2020 15:50
Biology, 16.12.2020 15:50
Geography, 16.12.2020 15:50
Mathematics, 16.12.2020 15:50
