Engineering, 22.08.2021 04:50 klmklm3799
2. BCD uses 6 bits to represent a symbol. a) True b) False
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
2. BCD uses 6 bits to represent a symbol. a) True b) False...
Chemistry, 24.06.2019 06:30
Biology, 24.06.2019 06:30
Mathematics, 24.06.2019 06:30
Mathematics, 24.06.2019 06:30
Advanced Placement (AP), 24.06.2019 06:30
Mathematics, 24.06.2019 06:30
Chemistry, 24.06.2019 06:30
Mathematics, 24.06.2019 06:30
Social Studies, 24.06.2019 06:30
History, 24.06.2019 06:30