Engineering, 27.08.2021 22:40 luceridiaaz
A static test stand is to be designed for testing a diffuser of a jet engine. The following conditions are known for the test: 50 kg/s of air enter a diffuser at a velocity of 750m/s and static pressure of 20kPa. The air leaves the diffuser at a velocity of 90 m/s and static pressure of 330kPa. The entrance area of the diffuser is 0.25 m2 and the exit area is 0.28 m^3.
Required:
Determine the magnitude and direction of the strut force necessary to hold the diffuser stationary when this diffuser is operated in an atmospheric pressure of 20 kPa.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
You know the right answer?
A static test stand is to be designed for testing a diffuser of a jet engine. The following conditio...
Questions
English, 22.06.2019 07:00
