subject
Engineering, 31.08.2021 02:50 potatochin21

Hi my name is Alejandro and I would like to discuss and uncover the roles of an engineer and acquire some knowledge in the engineering profession no matter, the degree, as long as it falls in the engineering principles since college enrollment is nearing and would like to make the final decision on what engineering path I would like to take in the future. Thanks, respond if you have the time for a 10 minute interview/ questionaire. A reason at the soonest would be dearly appreciated.​

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Ahot wire operates at a temperature of 200°c while the air temperature is 20°c. the hot wire element is a tungsten wire of 5 um diameter and 2 mm in length. plot using excel current, heat transfer and heat generated by the wire for air velocity varying from 1-10 m/s in steps of lm/s? matlab the sensor voltage output, resistance, or assume nu 0.989 re033pr13 take air properties at tr (200°c20°c)/2 = 110°c properties of tungsten: c 0.13 kj/kg.k 3 p 19250 kg/m k (thermal conductivity) = 174 w/m.k
Answers: 2
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
You know the right answer?
Hi my name is Alejandro and I would like to discuss and uncover the roles of an engineer and acquire...
Questions
question
Mathematics, 01.07.2021 14:10
question
Mathematics, 01.07.2021 14:10
question
Computers and Technology, 01.07.2021 14:10
question
Social Studies, 01.07.2021 14:10
question
Mathematics, 01.07.2021 14:10
question
English, 01.07.2021 14:10
question
Mathematics, 01.07.2021 14:10
question
Mathematics, 01.07.2021 14:10
Questions on the website: 13722361