1.1 An engineer claims the following about the digital format: “ In a digital system, logic 0 and logic 1 are represented by two voltage levels. Since there is a significant voltage difference between the two levels, noise will not affect the logic value, and thus digitized information is immune to noise.” Is the statement correct? Explain.

Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.

When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point

Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.