Engineering, 06.09.2021 21:50 fanofhope31

A simple way to model air pollution over a city is with a box model that assumes complete mixing and limited capability for the polllution to disperse horizontally or vertically except in the directin of the prevailing winds (for example, a town locted in a valley with an inversion later above it). Consider a town having an inversion at 250m, a 20-km horizontal distance perpendicular to the wind, a windspeed of 2m/s, and a carbon monoxide emission rate of 60kg/s. Assume the CO is conservative and completed mixed in the box. Required:
What would be the CO concentration in the box?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Determine the damped natural frequencies and the steady state response of a decoupled damped forced two degrees of freedom system. 10ä1 + 2q1 20q1 10 cos t; 10q2 +4q2 + 40q2 10 cos t

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

You know the right answer?

A simple way to model air pollution over a city is with a box model that assumes complete mixing and...

Questions