Engineering, 07.09.2021 01:00 mateotrevino1
Two wooden planks each in thick and 1 / 2 in. thick and 9 in. wide, are joined by the dry mortise joint shown. Knowing that the wood used shears off along its grain when the average shearing stress reaches 1.20 ksi, determine the magnitude P of the axial load that will cause the joint to fail. Two wooden members of uniform rectangular cross section of sides a = 100 mm and b = 60 mm are joined by a simple glued joint as shown. Knowing that the ultimate stresses for the joint are sigma U = 1.26 MPa in tension and tau U = 1.50 MPa in shear and that P = 6 kN, determine the factor of safety for the joint when (a) alpha = 20degree, (b) 35degree, (c) alpha = 45degree. For each of these values of alpha, also determine whether the joint will fail in tension or in shear if P is increased until rupture occurs.
Answers: 2
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
Engineering, 04.07.2019 19:10
The short distance from the objective lens to the object causes problems at high magnification. which of the following is the most serious? a. cleaning the object surface b. positioning the object c. reflection from the object surface. d. illumination of the object
Answers: 1
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
Engineering, 04.07.2019 19:10
Starting wih an energy balance on a rectangular volume element, derive the one- dimensional transient heat conduction equation for a plane wall with constant thermal conductivity and no heat generation.
Answers: 1
Two wooden planks each in thick and 1 / 2 in. thick and 9 in. wide, are joined by the dry mortise jo...
English, 06.10.2021 07:40
Mathematics, 06.10.2021 07:40
Mathematics, 06.10.2021 07:40
Mathematics, 06.10.2021 07:40
Mathematics, 06.10.2021 07:40
Mathematics, 06.10.2021 07:40
Social Studies, 06.10.2021 07:40
Chemistry, 06.10.2021 07:40
History, 06.10.2021 07:40