subject
Engineering, 07.09.2021 03:10 cmariecarrizales

Choose a product of engineering, such as bridges, skyscrapers, irrigations systems. Create a presentation using software—such as PowerPoint, Prezi, or another of your choosing—to illustrate at least three major changes in this product of engineering. You should have images to illustrate the changes as well as notes about how and why these changes occurred. Remember, engineering needs to adapt to both improvements in technology and changing social needs, so consider how the changes you identify reflect both of these influences. Your presentation should contain relevant images that reflect your points. All written content should be free of mechanical errors and easy to read. At the end of your presentation, include a list of websites or other sources you used to gather your information. You list should include a minimum of three sources.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.
Answers: 1
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
You know the right answer?
Choose a product of engineering, such as bridges, skyscrapers, irrigations systems. Create a present...
Questions
question
Mathematics, 24.03.2021 01:00
question
History, 24.03.2021 01:00
question
Biology, 24.03.2021 01:00
question
Mathematics, 24.03.2021 01:00
question
Mathematics, 24.03.2021 01:00
question
Mathematics, 24.03.2021 01:00
Questions on the website: 13722360