subject
Engineering, 13.09.2021 18:50 genesis0523

- Ô DU ns 1 How much does it cost the organization when the inspector travels from doo 1 to department H (through department A, C, E, G and F) 2 How much is the total distance (in meters) does the inspector travels from door 1 to department E (through department A, C, I, H, F and G) 3. From department A How much money will the company save if they move department Eto same location as department F? (Through department C, H, F and G) 4. From the door 1 How much money will the company save if they move department I to same location as department E? (Through departmen AC, E, G, F and H) 5. What is the total cost of the supervisor travelling from department A up until he comes back again to department A 6. If the total distance of the inspector traveling from door 1until he comes back to door 1, is reduced to half, how much money will the organization have saved 7. From department A until he comes back to department A What is the total distance (in meters) the supervisor travels, if he has to visit all department three times 8. From door 1 which route cost less (how much) to get to department F (Through department A, C, I and H) OR (Through department A, C, E and G) 9. How much does it cost the organization for the inspector to travel department C to department H (Through department E, G and F) 10. From department A: How much money will the company save if they move department H to same location as department C (Through department C and I) He answers only. = toolbar, press ALT+F10 (PC) or ALT+FN+F10 (Mac). Save A Answers Save and Sut e and Submit to save and submit. Click Save all Answers to save all answers. a W Desktop 25°C O​

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
question
Engineering, 04.07.2019 18:20
Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?
Answers: 1
question
Engineering, 05.07.2019 23:20
Which one of the following faults cause the coffee in a brewer to keep boiling after the brewing cycle is finished? a. an open circuit in the heating element b. a short circuit at the terminals c. welded contacts on the thermostat d. a leak around the gasket
Answers: 3
You know the right answer?
- Ô DU ns 1 How much does it cost the organization when the inspector travels from doo 1 to departme...
Questions
question
Mathematics, 30.05.2020 18:01
question
Mathematics, 30.05.2020 18:01
Questions on the website: 13722360