Engineering, 07.10.2021 19:30 BluSeaa
Which of the following is not a requirement to obtain licensure as a professional engineer?
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
Engineering, 06.07.2019 04:10
Apinion having 30 involute teeth of 6,5 module rotates at 220 r/min and transmits 2 kw to a gear wheel having 70 teeth; the addendum on both wheels is 4 of the circular pitch and the angle of obliquity is 200. determine; 3.1 the lengths of the path of approach and the arc of approach 3.2 the normal force between the teeth at an instant when there is only one pair of teeth in contact
Answers: 2
Engineering, 06.07.2019 05:10
The crank case of an automobile is 80 cm long 30 cm wide and 10 cm deep. find out the rate of heat flow from the crank case to the atmosphere when the automobile is moving at 90 km/hr. assume that the vibration of the engine and the chassis iaduce the transition from laminar to turbulent boundary layer may be considered over the entire surface. also find out the drag force on the total surface of the crank case. take the same average convective heat transfer coefficient and average shear stress for front and rare surfaces as for the bottom rnd sides crank case surface temperature is 75°c and atmospheric air temperature is 5 c
Answers: 2
You know the right answer?
Which of the following is not a requirement to obtain licensure as a professional engineer?...
Questions
Mathematics, 13.01.2022 06:10
Computers and Technology, 13.01.2022 06:10
Business, 13.01.2022 06:10
Mathematics, 13.01.2022 06:10
Mathematics, 13.01.2022 06:10
Business, 13.01.2022 06:10
Mathematics, 13.01.2022 06:10
English, 13.01.2022 06:10
Mathematics, 13.01.2022 06:20
History, 13.01.2022 06:20
Mathematics, 13.01.2022 06:20
