Engineering, 08.10.2021 05:00 daevinepetersopa86on
A generator has an output impedance of (300 + j45 Ω). Determine the turns ratio (N2/N1) of an ideal transformer necessary to match the generator to a load of (37 + j19 Ω) for maximum power transfer
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
You know the right answer?
A generator has an output impedance of (300 + j45 Ω). Determine the turns ratio (N2/N1) of an ideal...
Questions
Spanish, 06.09.2019 05:30
English, 06.09.2019 05:30
Mathematics, 06.09.2019 05:30
Mathematics, 06.09.2019 05:30
Mathematics, 06.09.2019 05:30
History, 06.09.2019 05:30
History, 06.09.2019 05:30
