subject
Engineering, 08.10.2021 21:10 aamu15

Circular bar 1 is attached to the wall by brackets 2 and 3. Bracket 3 is supported by a pin joint at F. Bracket 2 is attached to bracket 3 by bolt assemblies. Bar 1 is subjected to an external load of 5000 N (weight of the bar is negligible). Bracket 2 weighs 400 N and bracket 3 weighs 300 N. Bar 1 is made of a material which can withstand a maximum normal stress (sigma) =10 MPa and the bolted connections are made of material which can withstand a maximum shear stress ….


Circular bar 1 is attached to the wall by brackets 2 and 3. Bracket 3 is supported by a pin joint a

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
question
Engineering, 04.07.2019 19:20
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
question
Engineering, 06.07.2019 03:30
State the stress optic law in two dimension and obtain an expression for the same.
Answers: 2
question
Engineering, 06.07.2019 04:10
Apinion having 30 involute teeth of 6,5 module rotates at 220 r/min and transmits 2 kw to a gear wheel having 70 teeth; the addendum on both wheels is 4 of the circular pitch and the angle of obliquity is 200. determine; 3.1 the lengths of the path of approach and the arc of approach 3.2 the normal force between the teeth at an instant when there is only one pair of teeth in contact
Answers: 2
You know the right answer?
Circular bar 1 is attached to the wall by brackets 2 and 3. Bracket 3 is supported by a pin joint at...
Questions
question
Mathematics, 11.05.2021 22:50
question
Mathematics, 11.05.2021 22:50
Questions on the website: 13722367