Engineering, 09.10.2021 08:10 arri05
What aspect of timber framing that distinguishes it from light frame construction is the reason it demands apprenticeship?
complexity of carpentry involved
visibility of finished work
avoidance of nails used in framing
use of larger pieces of wood
50 POINTS
Answers: 1
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
What aspect of timber framing that distinguishes it from light frame construction is the reason it d...
Social Studies, 27.07.2019 16:30
Biology, 27.07.2019 16:30
Social Studies, 27.07.2019 16:30
Mathematics, 27.07.2019 16:30
Biology, 27.07.2019 16:30
Mathematics, 27.07.2019 16:30
Mathematics, 27.07.2019 16:30