Engineering, 19.10.2021 14:00 isabella4141
A Pitot-static tube is used to measure the velocity of helium in a pipe. The temperature and pressure are 47oF and 28 psia. A water manometer connected to the Pitot-static tube indicates a reading of 2.1 in.
(a) Determine the helium velocity.
(b) Is it reasonable to consider the flow as incompressible?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A Pitot-static tube is used to measure the velocity of helium in a pipe. The temperature and pressur...
Questions
Computers and Technology, 23.06.2019 02:00
Mathematics, 23.06.2019 02:00
History, 23.06.2019 02:00
History, 23.06.2019 02:00
Mathematics, 23.06.2019 02:00
Mathematics, 23.06.2019 02:00
