Engineering, 24.10.2021 14:20 gebradshaw2005

1. The formula used to add up the furthest distance from student No. 200095 and student No. 200091 is 2. The formula used to reduce the furthest distance from student No. 200094 and student No. 200085 is

3. The formula used to multiply the furthest distance from student No. 200081 and student No. 200083 is

4. The formula used to divide the furthest distance from student No. 200090 and student No. 200087 is an example of writing the correct answer to question no. 1 tsp. 4 is=84+85

5. The function used to add up a set of data in a range is called!

6. The following formula =Min(F4:F18) is used to determine the value.

7. Who is the student with the highest average score?

8. The Average function is used for?

9. To calculate the amount of data from a selected range is =COUNT(F4;F18), then the number of data from the table below is?

10. The logic used for the IF formula is.

help me to answer this question, i will top up your game

must be diamonds

1. The formula used to add up the furthest distance from student No. 200095 and student No. 200091

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

Engineering, 04.07.2019 19:20

Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer

Answers: 1

Answer

Engineering, 05.07.2019 10:10

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.

Answers: 1

Answer

Engineering, 06.07.2019 04:20

Two microscope slides are placed horizontally, one on top of the other, with a drop of a dishwashing liquid between them. the gap between the slides is 1 mm. a machine pulls the top slide to the right with a velocity of 0.15 millimeters per second while the bottom slide is held stationary. a stress gage indicates that a shearing stress of 0.5 pa is required to pull the top slide with this velocity. if the dishwashing liquid adheres to both slides during this process, what is the viscosity of the liquid? specify whether your answer is dynamic or kinematic viscosity, and use appropriate units.

Answers: 1

Answer

You know the right answer?

1. The formula used to add up the furthest distance from student No. 200095 and student No. 200091 i...

Questions