Engineering, 25.10.2021 19:20 cashmeout28

While keeping the presentation that you just listened in mind, it is expected of you to prepare a gamification project idea draft that could solve one of the issues that are given. Each one of you should only choose one topic. I EXPECT AT LEAST 4 PAGES.

1 – (Client: IETT, Target: Working and studying people who live in İstanbul and have to deal with the perils of public transportation daily)

We have a huge traffic problem at İstanbul! A small but deadly part of this situation is how crowded it gets if one wants to use mass transportation. Regarding this, you are expected to find a solution using gamification to the problem of getting in and out from those public transportation vehicles. You should choose one means of public transportation (such as the bus or metrobus) and create your idea around it. Don’t forget! The problem is about just how we get on the vehicle and get off from it!

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent

Answers: 2

Answer

You know the right answer?

While keeping the presentation that you just listened in mind, it is expected of you to prepare a ga...

Questions

SAT, 08.06.2020 19:57

NED HELP PLEASE