Engineering, 31.10.2021 03:20 rileyeddins1010
The following data were obtained when a cold-worked metal was annealed. (a) Estimate the recovery, recrystallization, and grain growth temperatures; (b) recommend a suitable temperature for a stress-relief heat treatment; (c) recommend a suitable temperature for a hot-working process; and (d) estimate the melting temperature of the alloy.
Answers: 2
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 19:10
Tom is having a problem with his washing machine. he notices that the machine vibrates violently at a frequency of 1500 rpm due to an unknown rotating unbalance. the machine is mounted on 4 springs each having a stiffness of 10 kn/m. tom wishes to add an undamped vibration absorber attached by a spring under the machine the machine working frequency ranges between 800 rpm to 2000 rpm and its total mass while loaded is assumed to be 80 kg a) what should be the mass of the absorber added to the machine so that the natural frequency falls outside the working range? b) after a first trial of an absorber using a mass of 35 kg, the amplitude of the oscillation was found to be 10 cm. what is the value of the rotating unbalance? c) using me-3.5 kg.m, find the optimal absorber (by minimizing its mass). what would be the amplitude of the oscillation of the absorber?
Answers: 3
Engineering, 04.07.2019 19:10
Agas is compressed from vi 0.3 m, p 1 bar to of v2 0.1 m3, p2--3 bar. pressure and volume are related linearly during the process. for the gas, find the work, in kj.
Answers: 2
Engineering, 06.07.2019 03:20
Steam at a pressure of 100 kpa and a quality of 50% initially fills a rigid vessel having a volume of 0.5 m^3. the steam is then heated, causing the pressure in the vessel to rise to 150 kpa. determine: i. the mass of the steam in the vessel. ii. the temperature and quality of the steam after the heating process. ii the mass of the vapour, mg and liquid, m in the vessel after the heating process. if the steam in the vessel is now further heated, what would the pressure and temperature in the vessel be when all steam has turned into saturated vapour? b. sketch the processes in part (a) and part (b) on p-v and t-v diagrams, indicating clearly the temperatures, pressures and the paths. c. (0.59kg, 111.4°c, 73%, 0.4307kg, 0.1 593kg, 2.11 bar, 121.84°c)
Answers: 1
The following data were obtained when a cold-worked metal was annealed. (a) Estimate the recovery, r...
English, 03.08.2019 13:30
History, 03.08.2019 13:30
Advanced Placement (AP), 03.08.2019 13:30
History, 03.08.2019 13:30
Mathematics, 03.08.2019 13:30
English, 03.08.2019 13:30
Mathematics, 03.08.2019 13:30
Mathematics, 03.08.2019 13:30
Mathematics, 03.08.2019 13:30
Mathematics, 03.08.2019 13:30
Mathematics, 03.08.2019 13:30
Mathematics, 03.08.2019 13:30
English, 03.08.2019 13:30
Computers and Technology, 03.08.2019 13:30