Engineering, 05.11.2021 03:00 kimberlyalonso6697

Design a single linear phase equiripple FIR filter with two stopbands, the first stopband is from 100 KHz to 200 KHz the second stopband is from 500 KHz to 700 KHz. Other frequencies outside theserangesare in the passband. The sample rateis2MHz. The filter should have more than 50 dB attenuation at the center of the stopbands. The passbands shall have no more than 0.1dB of ripple. Plot the magnitude of the frequency response in Matlab and include this in your answer as well as your working Matlab code.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

You know the right answer?

Design a single linear phase equiripple FIR filter with two stopbands, the first stopband is from 10...

Questions