Engineering, 22.11.2021 18:10 Nycin
Tech A says that in a full floating axle, the axle does not support the weight of the vehicle. Tech B says that when adjusting wheel bearings the final torque should be about 20 ft-lbs. Who is correct?
Answers: 1
Engineering, 04.07.2019 18:10
Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
Tech A says that in a full floating axle, the axle does not support the weight of the vehicle. Tech...
Mathematics, 21.02.2020 10:52
Chemistry, 21.02.2020 10:52
History, 21.02.2020 10:53
Mathematics, 21.02.2020 10:57
Mathematics, 21.02.2020 10:59
Mathematics, 21.02.2020 11:00
History, 21.02.2020 11:01
History, 21.02.2020 11:01
Mathematics, 21.02.2020 11:02
Mathematics, 21.02.2020 11:04
Biology, 21.02.2020 11:05