Parts arrive at a machine shop with EXPO (25) interarrival times (all times are in minutes); the first part arrives at time zero. The shop has two machines, and arriving parts are assigned to one of the machines (50% probability). Except for the processing times, both machines operate in the same fashion. When a part enters a machine area, it requires operator attention to set up the part on the machine (there is only one operator in the shop). After the part is set up. The machine can process it without the operator. Upon completion of the processing, the operator is once again required to remove the part. After completion, the parts exit the system (parts have to go to only one machine). The same operator does all setups and part removals, with priority given the machine waiting the longest for an operator. The times are as below: Machine number Setup Time Process Time Removal Time
1 TRIA (8, 11, 16) TRIA (20, 23, 26) TRIA (7, 9, 12)
2 TRIA (5, 8, 14) TRIA (11, 15, 20) TRIA (4, 6, 8)

Required:
Run the simulation for 25,000 minutes, and observe statistics on machine utilization, operator utilization.