subject
Engineering, 25.11.2021 14:00 uwunuzzles

A municipal WW activated sludge facility has the following characteristics: Flow = 7.2 million liters per day Influent BOD5 = 200 mg/L Aeration basin volume = 3,000m^3 2 circular clarifiers (each with diameter = 20m and depth =4m) Return activated sludge flow rate = 3.5 million liters per day per clarifier MLVSS concentration = 3,500 mg/L Effluent VSS is negligable Sludge VSS concentration = 6,800 mg/L. Required:
Determine the daily volume of sludge in liters per day (L/day) that must be removed to maintain a solids residence time of 5 days.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
A municipal WW activated sludge facility has the following characteristics: Flow = 7.2 million liter...
Questions
question
Law, 27.01.2020 20:31
Questions on the website: 13722367