Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Engineering, 06.07.2019 02:30
Around steel bar, made from material with a yield stress of 750mpa, is loaded so that it has stresses co locations of maximum normal stress and maximum shear stress. use maximum shear stress and maximum distortion energy theories to calculate the safety factors for initial yielding failures.
Answers: 3
About machine Learning...
Mathematics, 17.11.2020 21:10
Mathematics, 17.11.2020 21:10
Medicine, 17.11.2020 21:10
Mathematics, 17.11.2020 21:10
Mathematics, 17.11.2020 21:10
Mathematics, 17.11.2020 21:10
Mathematics, 17.11.2020 21:10
Biology, 17.11.2020 21:10
Physics, 17.11.2020 21:10
History, 17.11.2020 21:10
Mathematics, 17.11.2020 21:10