Engineering, 26.11.2021 01:00 holman9308
Water flows through a horizontal pipe at a rate of 2.6 gal/s. The pipe consists of two sections of diameters 4 in. and 2 in. with a smooth reducing section. The pressure difference between the two pipe sections is measured by a mercury manometer. Neglecting frictional effects, determine the differential height of mercury between the two pipe sections. Take the densities of mercury and water as rhoHg = 847 lbm/ft3 and rhoW = 62.4 lbm/ft3. Horizontal bottle has nozzle at the right side. At the right side of nozzle, cylindrical horizontal shape is shown. The right arrow labelled as flow. The differential height of mercury between the two pipe sections is in.
Answers: 3
Another question on Engineering
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
Engineering, 04.07.2019 18:10
Slip occurs via two partial dislocations because of (a) the shorter path of the partial dislocation lines; (b) the lower energy state through partial dislocations; (c) the charge balance.
Answers: 1
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
Engineering, 04.07.2019 19:10
A)-in the process of engineering design, explain the contribution of material selection. b)- explain the procedure of synthesis as is employed in engineering design. c)- is there any relationship between ergonomics and engineering design? explain. d)- safety consideration in engineering design includes human, product and the enviroment . explain how safety will be incorporated into the design?
Answers: 3
You know the right answer?
Water flows through a horizontal pipe at a rate of 2.6 gal/s. The pipe consists of two sections of d...
Questions
Biology, 24.06.2019 07:10
Geography, 24.06.2019 07:10
English, 24.06.2019 07:10
History, 24.06.2019 07:10
Mathematics, 24.06.2019 07:10
Physics, 24.06.2019 07:10
