subject
Engineering, 30.11.2021 09:30 davisnaziyahovz5sk

An electrically charged resistance wire has a diameter of 2mm and a resistance of 0.10ohm per foot of wire. The thermal conductivity of the wire is 10btu/hr sq ft. At a current oof 100amp, calculate the temperature difference between the center of the wire at steady rate

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 19:10
The air in an automobile tire with a volume of 0.015 m3 is at 32°c and 140 kpa gage. determine the amount of air that must be added to raise the pressure to the recommended value of 206 kpa gage. assume the atmospheric pressure to be 128 kpa and the temperature and the volume to remain constant.[r-0.287 kj/kgk]
Answers: 3
You know the right answer?
An electrically charged resistance wire has a diameter of 2mm and a resistance of 0.10ohm per foot o...
Questions
question
Mathematics, 10.02.2021 01:30
question
Social Studies, 10.02.2021 01:30
question
Mathematics, 10.02.2021 01:30
question
Mathematics, 10.02.2021 01:30
question
Mathematics, 10.02.2021 01:30
question
Mathematics, 10.02.2021 01:30
Questions on the website: 13722360