Engineering, 01.12.2021 03:00 Lena3055
The water flowing through a 2.1 cm (inside diameter) pipe flows out through three 1.1 cm pipes. (a) If the flow rates in the three smaller pipes are 28, 18, and 13 L/min, what is the flow rate in the 2.1 cm pipe
Answers: 1
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
The water flowing through a 2.1 cm (inside diameter) pipe flows out through three 1.1 cm pipes. (a)...
Mathematics, 08.07.2019 17:00
Computers and Technology, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00
Computers and Technology, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00
Computers and Technology, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00
Social Studies, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00
History, 08.07.2019 17:00
Mathematics, 08.07.2019 17:00