Engineering, 01.12.2021 04:50 fatty18

A rotor has a rectangular blade planform, a solidity of 0.1, ideal blade twist, and operates in hover at a thrust coefficient of 0.008. By numerical means, using the combined blade element momentum theory (BEMT), compare the predicted inflow ratio across the span of the blade with the exact (analytic) result (uniform inflow result). Plot continuous line for exact result and points (markers) for numerical result. Show also the radial distributions of thrust, induced torque, lift coefficient, and the compare the solutions obtained using the exact theory. Compare the numerical calculations of the integrated thrust and induced power with exact results for this rotor over the range 0 < CT < 0.01.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 03.07.2019 15:10

Two flowing streams of argon gas are adiabatically mixed to form a single flow/stream. one stream is 1.5 kg/s at 400 kpa and 200 c while the second stream is 2kg/s at 500 kpa and 100 ? . it is stated that the exit state of the mixed single flow of argon gas is 150 c and 300 kpa. assuming there is no work output or input during the mixing process, does this process violate either the first or the second law or both? explain and state all your assumptions.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Apipe with an outside diameter of 15 cm is exposed to an ambient air and surrounding temperature of -20°c. the pipe has an outer surface temperature of 65°c and an emissivity of 0.85. if the rate of heat loss from the pipe surface is 0.95 kw per meter of length, the external convective heat transfer coefficient (h) is: (a) 12.5 w/m"k (b) 18.6 w/mk (c) 23.7 w/mk (d) 27.9 w/mk (e) 33.5 w/mk

Answers: 1

Answer

You know the right answer?

A rotor has a rectangular blade planform, a solidity of 0.1, ideal blade twist, and operates in hove...

Questions