Engineering, 01.12.2021 17:30 daydallas01

Consider a system for heating a liquid benzene/toluene solution to distil a pure benzene vapour. A particular batch distillation unit is charged initially with 100 mol of a 60 percent mol benzene/40
percent mol toluene mixture. Let (mol) be the amount of liquid remaining in the still, and let (mol
B/mol) be the benzene mole fraction in the remaining liquid. Conservation of mass for benzene and
toluene can be applied to derive the following relation [Felder, 1986].
= 100 (

0.6
)
0.625 (
1 −
0.4
)
−1.625
Determine what mole fraction of benzene remains when = 70[mol]. Please present both
numerical and graphical solutions. Both results and show the percentage error of graphical solution
shall be presented by using disp or fprintf function

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Acertain flow of air (at stp) has a velocity distribution given by v i (in ft/s). if this flow is going through a 4 ft square area in the yz-plane (centered at the origin), what is the mass flow rate (in lbm/s)?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Asimple rankine cycle uses water as the working fluid. the water enters the turbine at 10 mpa and 480c while the condenser operates at 6 kpa. if the turbine has an isentropic efficiency of 80 percent while the pump has an isentropic efficiency of 70 percent determine the thermal efficiency

Answers: 1

Answer

You know the right answer?

Consider a system for heating a liquid benzene/toluene solution to distil a pure benzene vapour. A...

Questions