1)How does camber affect the lift coefficient of an airfoil in supersonic flow? 2) How does camber affect the lift coefficient of an airfoil in supersonic flow?

3) What is thermal choking? What happens if heat is added to a thermally choked subsonic flow?

4) What is stagnation pressure?

5)What are similarity rules? How do they differ from dimensional analysis?

6)What is an unstated d intake diffuser?

7)What are similarity rules? How do they differ from dimensional analysis?

8)Shocks in transonic flow are usually normal shocks – why?

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Determine the time of the day and month of the year at which the peak sensible cooling load occurs for a top floor, north-eastern corner room of an office building in durban for the following conditions: floor area: 8 x 8 x 3 m east and north walls: 115 mm face brick (outside), 20 mm air space, 115 mm ordinary brick (inside) with 15 mm plaster roof construction: suspended plasterboard ceiling, 450 mm air space, 150 mm concrete, 75mm screed, waterproofing no heat transfer across other surfaces window area 3x 1,5 m high in north wall only. ordinary glass with venetian blinds. lights and occupants : from 07: 00 to 18: 00 average light density: 25 w/m2 number of occupants : 5 seated, light office work room temperature 24°c