Engineering, 03.12.2021 17:30 tasnimsas3
Compute the longitudinal strength of an aligned carbon fiber– epoxy matrix composite having a 0.20 volume fraction of fibers, assuming the following: (1) an average fiber diameter of 6 × 10–3 mm, (2) an average fiber length of 8.0 mm, (3) a fiber fracture strength of 4.5 GPa, (4) a fiber–matrix bond strength of 75 MPa, (5) a matrix stress at composite failure of 6.0 MPa, and (6) a matrix tensile strength of 60 MPa.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
Engineering, 04.07.2019 19:10
With increases in magnification, which of the following occur? a. the field of view decreases. b. the ambient illumination decreases. c. the larger parts can be measured. d. the eyepiece must be raised.
Answers: 1
You know the right answer?
Compute the longitudinal strength of an aligned carbon fiber– epoxy matrix composite having a 0.20 v...
Questions
Mathematics, 26.12.2021 18:40
Mathematics, 26.12.2021 18:40
Mathematics, 26.12.2021 18:50
Mathematics, 26.12.2021 18:50
English, 26.12.2021 18:50
Chemistry, 26.12.2021 18:50
Mathematics, 26.12.2021 18:50
English, 26.12.2021 18:50
English, 26.12.2021 19:00
Social Studies, 26.12.2021 19:00
Mathematics, 26.12.2021 19:10
Mathematics, 26.12.2021 19:10
Geography, 26.12.2021 19:10
