Engineering, 05.12.2021 17:20 saniyawilliams1207

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75 W/mK. The size of brass wall is 0.5 m x 0.5 m. The mean temperature of wall and air are 90C and 30C, respectively. It is desired to increase the heat transfer rate by adding rectangular brass fins 1 mm thick, 25 mm in length and pitched 10 mm apart (center to center). Convective heat transfer coefficient between the wall and the air is 15 W/m2 K. a. Calculate the increase in the heat transfer from the wall as a result of adding fins.
neglect heat loss from the tip.
b. Determine the overall effectiveness of the fins.

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

Heat is being transferred from water to air through a brass wall having thermal conductivity of 75 W...

Questions