Engineering, 07.12.2021 06:00 LiliGrey7612

A Rankine cycle operates between pressures of 2 MPa and 10 kPa with a maximum temperature of 600 o C. The pump can be assumed reversible and adiabatic and its inlet is saturated water. Assuming adiabatic turbine with an isentropic efficiency of 80 percent, and neglecting changes in kinetic and potential energies: i. Determine the specific turbine work.
ii. Determine the thermal efficiency of the cycle
iii. Determine the temperature of the steam at the turbine outlet.
iv. Determine the temperature of the water at the pump outlet.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

You know the right answer?

A Rankine cycle operates between pressures of 2 MPa and 10 kPa with a maximum temperature of 600 o C...

Questions