Engineering, 09.12.2021 15:40 xojade
5. In a hydraulic jump in a rectangular channel the discharge per unit width (q) is 2.0 m3/s/m and the energy loss is 1.75 m. Calculate the initial depth, Froude number and sequent depth of the jump.
Answers: 2
Engineering, 03.07.2019 15:10
If you were designing a bumper for a car, would you prefer it to exhibit elastic or plastic deformation? why? consider the functions of a bumper in both a minor "fender-bender" and a major collision.
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
5. In a hydraulic jump in a rectangular channel the discharge per unit width (q) is 2.0 m3/s/m and t...
Mathematics, 04.02.2021 22:40
Mathematics, 04.02.2021 22:40
Mathematics, 04.02.2021 22:40
History, 04.02.2021 22:40
Mathematics, 04.02.2021 22:40
History, 04.02.2021 22:40
Mathematics, 04.02.2021 22:40
English, 04.02.2021 22:40
Mathematics, 04.02.2021 22:40