Engineering, 11.12.2021 20:40 kitam2871
I need 10 types of drawing tools their uses and how to maintain them
Answers: 1
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
I need 10 types of drawing tools their uses and how to maintain them...
Mathematics, 08.07.2019 21:00
Business, 08.07.2019 21:00
History, 08.07.2019 21:00
Mathematics, 08.07.2019 21:00
History, 08.07.2019 21:00
Mathematics, 08.07.2019 21:00
Spanish, 08.07.2019 21:00
Mathematics, 08.07.2019 21:00
English, 08.07.2019 21:00
Mathematics, 08.07.2019 21:00
Health, 08.07.2019 21:00
Mathematics, 08.07.2019 21:00