subject
Engineering, 14.12.2021 04:30 Hammon1774

Biết Rb = 180kΩ
Rc = 2,7kΩ, Re = 1kΩ,
Ucc = 15V
β = 120, UBE = 0,7V
C1 = 10μF, C2 = 10μF.
a. Nêu tác dụng của điện trở Rb và điện trở Re và Transistor Q?
b. Tính các giá trị dòng và áp một chiều
c. Vẽ đường tải một chiều và xác định điểm làm việc tĩnh

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:20
Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis
Answers: 1
question
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
question
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
You know the right answer?
Biết Rb = 180kΩ
Rc = 2,7kΩ, Re = 1kΩ,
Ucc = 15V
β = 120, UBE = 0,7V
C1 =...
Questions
question
Mathematics, 05.07.2019 05:30
Questions on the website: 13722360