Draw the Shearing Force and Bending Moment diagram with its derivation.
...
Engineering, 20.12.2021 14:00 minie66
Draw the Shearing Force and Bending Moment diagram with its derivation.
Answers: 2
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way
Answers: 2
English, 05.08.2021 14:00
Computers and Technology, 05.08.2021 14:00
Mathematics, 05.08.2021 14:00
English, 05.08.2021 14:00
English, 05.08.2021 14:00
Mathematics, 05.08.2021 14:00
Mathematics, 05.08.2021 14:00
Mathematics, 05.08.2021 14:00
Mathematics, 05.08.2021 14:00
Mathematics, 05.08.2021 14:00