Engineering, 20.12.2021 14:00 realneggalloyd

A settling column analysis is performed on a dilute suspension of particles from water. The suspension exhibited discrete particle settling characteristics. Data collected from samples taken at a depth 1.5 m as follows: Settling time (min) 0.6 1.2 2.2 4.5 6.0 8.8
Fraction of particles settled 0.30 0.45 0.60 0.70 0.85 0.96
a. Plot the velocity distribution for the suspension
b. Find the overflow rate (Q/A) for a settling tank that will give at least 75 % removal
c. Assuming the feed flow rate is 850 m3//hr., determine the dimension of the settling tank.
d. What is the particle size distribution (mass fraction vs. diameter) if we assume the particle density is that of sand (sg = 2.65)

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Courses that are developed by subject matter experts, internal or extemal to the college or university. these programs are marketed by the school (clo2) marks a)-vocational schools b)-vendor training c)-colleges & universities d)-continuing education programs

Answers: 2

Answer

Engineering, 04.07.2019 18:20

A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.

Answers: 3

Answer

You know the right answer?

A settling column analysis is performed on a dilute suspension of particles from water. The suspensi...

Questions