subject
Engineering, 21.12.2021 20:40 ElegantEmerald

You have a system that contains a special processor for doing floating point operations. You have determined that 50% of your computations can use the floating point processor. The speed-up of the floating point processor is 10. What percentage of the computations should be able to use the floating point processor in order to achieve an overall speedup of 2

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 06.07.2019 02:30
Define thermoplastic polymers and thermosetting polymers in terms of their structures, and (ii) describe briefly a process suitable for the production of products from each type of polymer.
Answers: 3
You know the right answer?
You have a system that contains a special processor for doing floating point operations. You have de...
Questions
question
Computers and Technology, 28.10.2020 15:50
question
Social Studies, 28.10.2020 15:50
question
Mathematics, 28.10.2020 15:50
question
Mathematics, 28.10.2020 15:50
question
English, 28.10.2020 15:50
Questions on the website: 13722367