Engineering, 28.12.2021 07:20 xavier0329
A DEA linear programming model involving four input measures and three output measures will have (exclude non-negativity constraints) a. 13 constraints. b. 7 constraints. c. 12 constraints. d. 8 constraints.
Answers: 1
Another question on Engineering
Engineering, 03.07.2019 14:10
Explain the difference laminar and turbulent flow. explain it with the shear stress and the velocity profiles.
Answers: 1
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 19:10
What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.
Answers: 1
Engineering, 06.07.2019 03:10
Consider two concentric spheres forming an enclosure with diameters of 12 cm and 18 cm the spheres are maintained at uniform temperatures ti-50°c and t2 = 250°c and have emissivities .45 and .8, respectively. determine the net rate of radiation heat transfer between the two spheres per unit surface area.
Answers: 1
You know the right answer?
A DEA linear programming model involving four input measures and three output measures will have (ex...
Questions
Biology, 19.08.2020 21:01
Biology, 19.08.2020 21:01
Health, 19.08.2020 21:01
Mathematics, 19.08.2020 21:01
Mathematics, 19.08.2020 21:01
English, 19.08.2020 21:01
Mathematics, 19.08.2020 21:01
Physics, 19.08.2020 21:01
English, 19.08.2020 21:01
