subject
Engineering, 15.02.2022 01:00 irene3492

Remerowski Corporation Inc. asks you to estimate the cost to purchase a new piece of production equipment. The company purchased this same type of equipment in the past for $10,000. The original equipment had a capacity of 2000 units, while the new equipment has a capacity of 1000 units. The power-sizing exponent for this type of equipment is 0.28. In addition, the cost index for this type of equipment was 126 when the original unit was purchased and is now 160. If Remerowski uses an 8% annual interest rate to evaluate equipment purchases, estimate the cost to purchase the new piece.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero
Answers: 2
question
Engineering, 06.07.2019 02:30
On solidification from a melt, the polymer polyethylene forms a semi-crystalline spherulite structure. (i) sketch an individual spherulite and label the amorphous and crystalline regions. (ii) draw a schematic to show the changes in specific volume with temperature during cooling from the melt, comparing it to the theoretical extremes of fully crystalline and fully amorphous (indicate tm and tg)
Answers: 2
You know the right answer?
Remerowski Corporation Inc. asks you to estimate the cost to purchase a new piece of production equi...
Questions
question
Mathematics, 29.10.2020 04:40
Questions on the website: 13722362