Engineering, 22.02.2022 15:20 kvil9368

IRRIGATION ENGINEERING. On each day, 0.6 hectare of corn and 1.0 hectare of grass are to be irrigated .Readily available water for corn is 8cm and readily available water for grass is 15 cm . Corn field has 26 furrows each discharges 19 lit/min and grass field has 70 furrows and each discharges 27 lit/min Assume that water is uniformly applied over field . Find the application efficiency for
a. Corn field
b. grass field
c. Entire field

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 19:10

What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

An electric kettle is made out of stainless steel, weighs two pounds (when empty) and is equipped with a heating element that consumes 2 kw of electricity. assuming that the water and the kettle are at the same uniform temperature at any moment of time, calculate the shortest possible time to bring 2 quarts of water from room temperature to the onset of boiling

Answers: 2

Answer

You know the right answer?

IRRIGATION ENGINEERING. On each day, 0.6 hectare of corn and 1.0 hectare of grass are to be irrigate...

Questions