subject
Engineering, 14.03.2022 17:50 jair512872

Find the dimensions of the constants if the equation is dimensionally homogeneous x^2=Mt^2eN^t^2

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
You know the right answer?
Find the dimensions of the constants if the equation is dimensionally homogeneous x^2=Mt^2eN^t^2...
Questions
question
Mathematics, 03.09.2021 14:50
question
Mathematics, 03.09.2021 15:00
question
Computers and Technology, 03.09.2021 15:00
question
Mathematics, 03.09.2021 15:00
question
Physics, 03.09.2021 15:00
question
Mathematics, 03.09.2021 15:00
Questions on the website: 13722360