Engineering, 21.03.2022 23:30 manlyman31
In the compound pulley pictured below, how many Newtons of force
load if 200 Newtons of effort force are applied to the pulley?
Fixed
pulley
I
loveable
ulley
[Figure9]
effort
load
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
In the compound pulley pictured below, how many Newtons of force
load if 200 Newtons of effort for...
Questions
Chemistry, 09.07.2019 12:30
Biology, 09.07.2019 12:30
English, 09.07.2019 12:30
Chemistry, 09.07.2019 12:30
Social Studies, 09.07.2019 12:30
Business, 09.07.2019 12:30
History, 09.07.2019 12:30
Chemistry, 09.07.2019 12:30
