A reason for temperature inversion in the valley​

Explanation:

Temperature inversion layers, also called thermal inversions or just inversion layers, are areas where the normal decrease in air temperature with increasing altitude is reversed and the air above the ground is warmer than the air below it. Inversion layers can occur anywhere from close to ground level up to thousands of feet into the atmosphere.

Inversion layers are significant to meteorology because they block atmospheric flow which causes the air over an area experiencing an inversion to become stable. This can then result in various types of weather patterns.

More importantly, though, areas with heavy pollution are prone to unhealthy air and an increase in smog when an inversion is present because they trap pollutants at ground level instead of circulating them away.

Causes

Normally, air temperature decreases at a rate of 3.5°F for every 1,000 feet (or roughly 6.4°C for every kilometer) you climb into the atmosphere. When this normal cycle is present, it is considered an unstable air mass, and air constantly flows between the warm and cool areas. The air is better able to mix and spread around pollutants.

During an inversion episode, temperatures increase with increasing altitude. The warm inversion layer then acts as a cap and stops atmospheric mixing. This is why inversion layers are called stable air masses.

Temperature inversions are a result of other weather conditions in an area. They occur most often when a warm, less dense air mass moves over a dense, cold air mass.

This can happen, for example, when the air near the ground rapidly loses its heat on a clear night. The ground becomes cooled quickly while the air above it retains the heat the ground was holding during the day.

Temperature inversions also occur in some coastal areas because upwelling of cold water can decrease surface air temperature and the cold air mass stays under warmer ones.

Topography can also play a role in creating a temperature inversion since it can sometimes cause cold air to flow from mountain peaks down into valleys. This cold air then pushes under the warmer air rising from the valley, creating the inversion.

In addition, inversions can also form in areas with significant snow cover because the snow at ground level is cold and its white color reflects almost all heat coming in. Thus, the air above the snow is often warmer because it holds the reflected energy.

answer biscay bay;